Complete Vent System for Rheem, Ruud, Weatherking Gas Furnaces THE MODEL *GPAK-1TR* KIT INCLUDES: 1 - POWER VENTER 1 - VENT HOOD 1 - 4” BAROMETRIC DRAFT CONTROL SPECIFICATIONS: MOTOR VOLTAGE 115V CONTROL CIRCUIT VOLATGE 24V 60hz, 3000 RPM, 95 WATTS, 1.26 AMPS, THERMALLY PROTECTED The *GPAK-1TR* is a complete venting system designed to side wall vent, Natural and LP gas furnaces. Each *GPAK-1TR* comes with three major components: Power Venter, Vent Hood and Draft Control. The *GPAK-1TR* can handle a maximum BTU/HR input of 150,000. The “T” of the *GPAK-1TR* indicates these kits have a post purge Relay/Timer which allows the Power Venter to continue operating for a nonadjustable period of approximately 45 seconds after the furnace burner shuts off.
INDICATED 45,000 AND 67,500 BTU FURNACES MUST NOT BE AUXILIARY POWER VENTED UNLESS THE
ORIGINAL VENT PRESSURE SWITCH IS REPLACED WITH A .30 VENT PRESSURE SWITCH, PART NO.
42-24064-01. FAILURE TO REPLACE THE PRESSURE SWITCH AS SPECIFIED COULD LEAD TO IMPROPER
OPERATION OF THE FURNACE RESULTING IN PROPERTY DAMAGE, PERSONAL INJURY OR DEATH.
FOR USE ON THE FOLLOWING RHEEM, RUUD, AND WEATHERKING
MODEL SERIES FURNACES:
GDG*, GDJ*, GVH*, GPH*, GLG, GLH*, GVG, GLJ*, GPK*, GLN*,
GPJ*, GVJ*, GDC, GLC, GDE, GLE, GVC, GYC, GLK*, GPP*,
GVA, GYA, GVB, GYB, WGVAH, WGVAG, WGDAG, WGLAG, GPN*, GPQ*,
GLQ*, GPR*, GLR*, 80PS*, 80LS*,
*Indicated models are CSA certified with the *GPAK-1TR* as a vent system.
Parts List
This item has the following parts which may be purchased separately:
Tip 1: For partial keyword, please use wildcard *. For example b2ta* Tip 2: If you want to find a particular manufacturer, use the "Browse by Manufacturer" feature.
Patriot-Supply.com has spent thousands of dollars and invested countless hours preparing cross references and other information to aid our customers. All information on this website is coded and copyrighted. Any and all information taken illegally will result in litigation.
