Unilift AP 12
Submersible drainage pump type Vertical single-stage stainless steel submersible pump with vertical discharge port and integrated submersible 1-phase totally enclosed motor in insulation class F with thermal overload protection. The pump is fitted with a suction strainer.
The impeller is a SEMI OPEN impeller for 7/16 in free passage suitable for pumping groundwater, surface water, rain water and similar.
The pump has a double shaft seal and an intermediate oil chamber pre-filled with non-toxic special oil.
The pump has a riser pipe, a cooling jacket for continuous cooling of the motor by the pumped liquid and long-life deep-groove greased-for-life ball bearings.
The pump is ready for use as it is fitted with carrying handle and is supplied with a 10 ft mains cable. The mains cable is of the plug type with glass sealing compound in the socket to prevent penetration of humidity into the stator windings.
| Liquid: |
| Liquid temperature range: | | 32 .. 131 °F |
| Technical: |
| Type of impeller: | | SEMI OPEN |
| Maximum particle size: | | 7/16 in |
| Approvals on nameplate: | | UL Listed, CSA |
| Curve tolerance: | | ISO 9906 Annex A |
| Materials: |
| Pump housing: | | Stainless steel |
| | | 1.4301 DIN W.-Nr. |
| | | 304 AISI |
| Impeller: | | Stainless steel |
| | | 1.4301 DIN W.-Nr. |
| | | 304 AISI |
| Installation: |
| Pump outlet: | | 1 1/2" NPT |
| Maximum installation depth: | | 32.8 ft |
| Electrical data: |
| Type of motor: | | PSC |
| Power input - P1: | | 900 W |
| | | 0.7 kW |
| Mains frequency: | | 60 Hz |
| Rated voltage: | | 1 x 115 V |
| Rated current: | | 8 A |
| Starting current: | | 48 A |
| Cos phi - power factor: | | 0,99 |
| Rated speed: | | 3350 rpm |
| Capacitor size - run: | | 20 µF/400 V |
| Enclosure class (IEC 34-5): | | IP58 |
| Insulation class (IEC 85): | | F |
| Length of cable: | | 10 ft |
| Type of cable plug: | | US |
| Others: |
| Shipping volume: | | 1.17 ft³ |
