rev-fury

46395401
FIELD CONTROLS
46395401
   
Parts Breakdown
$341.99

   

This item usually ships: Same Day.
FIELD CONTROLS PART # 46395401

SWG-4HDs STAINLESS STEEL POWER VENTER
4" INLET (HEAVY DUTY) UP TO 170,000BTU/HR GAS,  1.10 GPH OIL
For sidewall venting of gas and oil fired equipment

SWG-4D SPECIFICATIONS PROPERTY OF PATRIOT SUPPLY

MODEL

MAX* OIL GPH INPUT 100psi

MAX* OIL GPH INPUT 140psi

MAX** GAS BTU/hr. INPUT

Maximum Equivalent Feet of Vent Pipe

VENT PIPE SIZE

AT MAX BTU/hr. INPUT

AT 60% OF MAX BTU/hr. INPUT

SWG-4HDs

1.1

0.9

170,000

35

100

4"

 

 

 

 

65

100

5"

 

PROPERTY

OF

 

100

100

6"

 

PATRIOT

SUPPLY

 

100

100

7"



Gas and oil heating appliances generate heat through the combustion of fuel. The heat is transferred through the heat exchanger and distributed to the conditioned space. The products of combustion, however, must be vented safely out of the structure. In a conventional chimney, venting is achieved by the natural lifting action of the hot combustion gas. New, efficient systems absorb more of the heat in the heat exchanger and produce lower temperature vent gas. Lower temperature gas does not rise as quickly or as reliably as in older, less efficient systems. Power venting or sidewall venting is more economical and safer than chimney venting. A power venter uses a motorized blower to vent the products of combustion. A power venter is interlocked with the appliance to ensure that proper draft is achieved before the appliance burner is activated.

The SWG Power Venter is the safest, most efficient power venter available today.

Patented SWG Power Venters are ETL and cETL listed for all LP gas, natural gas, or oil-fired heating equipment. The SWG combines the motor, blower, and vent hood in one complete, easy to install unit. The SWG mounts on the outside of the building and pulls the combustion gases from the appliance through the outside wall utilizing 100% negative pressure.
Benefits of the SWG Power Venter include:
• 100% negative pressure in the vent pipe for maximum safety.
• Standard galvanized pipe can be used instead of expensive stainless steel.
• No need to seal vent pipe joints, saving time and money.
• Significantly longer vent lengths than positive pressure, direct vent systems.
• The SWG is recommended by major heating appliance manufacturers.

The SWG must be sized to match the appliance or appliances input firing rate. Most firing rates are published in the manufacturer’s installation manual. SWGs must be installed with a CK Control Kit to ensure proper listing and safe, efficient venting.

REPLACES SWG-4, SWG4, SWGII4HDS, SWGII-4HDS


NOT FOR USE ON COAL STOVES
**A FIELD CONTROLS POWER VENTER MUST ONLY BE INSTALLED BY A CERTIFIED TECHNICIAN AND MUST BE ADJUSTED WITH A CALIBRATED COMBUSTION ANALYZER. FAILURE TO DO SO WILL VOID ALL WARRANTIES AND COULD RESULT IN INJURY OR DEATH**

Parts List

This item has the following parts which may be purchased separately:

46234800
46234800
More Details...

$144.89

   

This item usually ships: Same Day.
RMK 4"HD STAINLESS STEEL REPLACEMENT MOTOR KIT FOR SWGII-4HD, SWG-4HD AND SWG-4HDS **NOT FOR USE ON COAL OR WOOD APPLIANCES**

46310400
46310400
More Details...

$33.87

   

This item usually ships: Same Day.
STAINLESS STEEL BLOWER WHEEL FOR SWG-4HD REPLACES 46180400

46451601
46451601
More Details...

$37.94

   

This item usually ships: 1-2 Weeks.
SWG-4 & SWG-4HD MOTOR ENCLOSURE ASSEMBLY

   
My Shopping Cart Items in Cart: 0 :: edit

Search

Enter a Part Name, Description, or Keyword.

Tip 1: For partial keyword, please use wildcard *.
For example b2ta*
Tip 2: If you want to find a particular manufacturer,
use the "Browse by Manufacturer" feature.

Call Us: (866) 321-4822