Manufacturer's Detail Page

Use this page to find products by manufacturer.

ICM

We sell 249 items made by ICM. This page shows items 81 to 100.

425
ICM
425
More Details...

$108.70

   

This item usually ships: Same Day.
3-Phase, Plug-in line monitors, front side protection. Adjustable 208-240 VAC, adjustable anti-short cycle timer, adjustable symmetry 4-8%, 8-pin plug-in.
427
ICM
427
More Details...

$119.50

   

This item usually ships: Same Day.
3-Phase, Plug-in line monitors, front side protection. Adjustable 400-480 VAC, adjustable anti-short cycle timer, adjustable symmetry 4-8%, 8-pin plug-in.
441
ICM
441
More Details...

$79.87

   

This item usually ships: Same Day.
THREE PHASE MOTOR PROTECTION. Protects against: Under voltage, over temperature, power interruptions, rapid short cycling, shorted temperature sensor, open temperature sensor, Control duty, SPST relay output. VOLTAGE: 120 or 208/240 VAC, FREQUENCY: 50/60 Hz, OUTPUT: Relay, SPDT, N.O.: 6 amps.
450
ICM
450
More Details...

$135.93

   

This item usually ships: Same Day.
THREE PHASE LINE VOLTAGE MONITOR. Fully programmable with LCD diagnostic display. 25-fault memory storage,non-volatile. Identifies front and back side faults. Protects against: voltage unbalance, high/low voltage, phase loss, phase reversal, faulty power, incorrect sequencing and rapid short cycling. Universal voltage operation: 190-630 VAC. VOLTAGE: 190-630 VAC, FREQUENCY: 50/60 Hz, VOLTAGE UNBALANCE: Adjustable: 2-25%, CONTROL: 18-240 VAC, DELAY ON BREAK TIMER: 1-5 minutes, OUTPUT: Relay, SPDT, N.O.: 10 amps, N.C.: 6 amps.
491
ICM
491
More Details...

$35.24

   

This item usually ships: Same Day.
SINGLE PHASE MOTOR PROTECTION. Low cost single phase motor protection. Built in anti-short cycle protection. Detects high/low voltage conditions. Helps prevent rapid short cycling. LED indicators: -Green for normal conditions -Red for fault Heavy duty SPDT, isolated relay output. VOLTAGE: 95-270 VAC, OUTPUT: Relay, SPDT, N.C./N.O.: 5 amps, TIME DELAY RANGE: Adjustable 6-600 seconds.
500
ICM
500
More Details...

$91.65

   

This item usually ships: Same Day.
MULTI-MODE DIGITAL TIMER. 24 VAC IMPUT VOLTAGE. Crystal timing accuracy. Microprocessor controlled. 4 single and two dual timing modes - DOM, DOB interval, single shot - DOM/DOB and repeat cycle. Easy to select, switch settable delays. Bright LEDs indicate input and output. Switct-settable time delays: 1 to 1,023 seconds or minutes in multiples of 0.1, 1, 10, and 100. 75 millisecond reset time during and after timing; May be reset during the time delay period without false output. 8-pin base standard model. 8 pin is for single pole. Base sold seperately. 4" x 2.5" x 1.75".
500-C-8
ICM
500-C-8
More Details...

$94.73

   

This item usually ships: Same Day.
MULTI-MODE DIG TMR 8-PIN CONN
501
ICM
501
More Details...

$92.99

   

This item usually ships: Same Day.
MULTI-MODE DIGITAL TIMER. 115 VAC IMPUT VOLTAGE. Crystal timing accuracy. Microprocessor controlled. 4 single and two dual timing modes - DOM, DOB interval, single shot - DOM/DOB and repeat cycle. Easy to select, switch settable delays. Bright LEDs indicate input and output. Switct-settable time delays: 1 to 1,023 seconds or minutes in multiples of 0.1, 1, 10, and 100. 75 millisecond reset time during and after timing; May be reset during the time delay period without false output. 8-pin base standard model. 8 pin is for single pole. Base sold seperately. 4" x 2.5" x 1.75".
502
ICM
502
More Details...

$94.15

   

This item usually ships: Same Day.
MULTI-MODE DIGITAL TIMER. 240 VAC IMPUT VOLTAGE. Crystal timing accuracy. Microprocessor controlled. 4 single and two dual timing modes - DOM, DOB interval, single shot - DOM/DOB and repeat cycle. Easy to select, switch settable delays. Bright LEDs indicate input and output. Switct-settable time delays: 1 to 1,023 seconds or minutes in multiples of 0.1, 1, 10, and 100. 75 millisecond reset time during and after timing; May be reset during the time delay period without false output. 8-pin base standard model. 8 pin is for single pole. Base sold seperately. 4" x 2.5" x 1.75".
503
ICM
503
More Details...

$94.15

   

This item usually ships: Same Day.
MULTI-MODE DIGITAL TIMER. 12 VDC IMPUT VOLTAGE. Crystal timing accuracy. Microprocessor controlled. 4 single and two dual timing modes - DOM, DOB interval, single shot - DOM/DOB and repeat cycle. Easy to select, switch settable delays. Bright LEDs indicate input and output. Switct-settable time delays: 1 to 1,023 seconds or minutes in multiples of 0.1, 1, 10, and 100. 75 millisecond reset time during and after timing; May be reset during the time delay period without false output. 8-pin base standard model. 8 pin is for single pole. Base sold seperately. 4" x 2.5" x 1.75".
600
ICM
600
More Details...

$206.76

   

This item usually ships: Same Day.
LEAD-LAG CONTROL. True dual stage control. Built in thermostat, -Adjustable set point -Adjustable deadband -Adjustable sequencer Regulates 1 or 2 heating/cooling systems, Ideal for refrigeration applications, communication substations, water treatment plants, anywhere redundant systems are used. INPUT: 18-30 VAC, Frequency: 50-60 Hz, OUTPUT: 2 amps maximum, POWER CONSUMPTION: 2 watts maximum/lockout ADJUSTABLE THERMOSTAT: -Set point: 55-90°, -Deadband: 2-20°, -Sequencer: 1-28 days.
601
ICM
601
More Details...

$177.04

   

This item usually ships: Same Day.
LEAD-LAG CONTROL: Low cost, open board version of ICM600. True dual stage control. Built in thermostat -Adjustable set point -Adjustable deadband -Adjustable sequencer. Regulates 1 or 2 heating/cooling systems. INPUT: 18-30 VAC, Frequency: 50-60 Hz, OUTPUT: 2 amps maximum, Frequency: 50/60 Hz, POWER CONSUMPTION: 2 watts maximum/lockout, ADJUSTABLE THERMOSTAT: -Set point: 55-90° -Deadband: 2-20° -Sequencer: 1-28 days.
602
ICM
602
More Details...

$70.30

   

This item usually ships: Same Day.
LEAD-LAG CONTROL. Low cost, open board lead lag control, Regulates two devices, Reliable, long life switching, Ideal for refrigeration applications. INPUT: 18-30 VAC (24 VAC), Frequency: 50-60 Hz, OUTPUT: 2 amps maximum, Frequency: 50/60 Hz, POWER CONSUMPTION: 2 watts maximum/lockout.
803
ICM
803
More Details...

$34.84

   

This item usually ships: Same Day.
Rapidstart - current sensing. Operates from 95-288 VAC, Maximum input voltage: 502VAC, Patented current sensing circuitry, Self-adjusting to voltage fluctuation, Easy to install, 2 wires, clip, or screw mounted, For scroll or reciprocating compressors, Solid-state circuitry, Boost starting torque, Disengages upon start, Operating temperature range -40°C to ±65°C, Intrinsically safe, fuse protected (fuse not user replaceable), UL recognized. Ideally suited for 1/2 thru 3 HP, 88-106 Mfd 330V capacitor.
805
ICM
805
More Details...

$40.02

   

This item usually ships: Same Day.
RAPIDSTART - CURRENT SENSING. Operates from 95-288 VAC, Maximum input voltage: 502VAC, Patented current sensing circuitry, Self-adjusting to voltage fluctuation, Easy to install, 2 wires, clip, or screw mounted, For scroll or reciprocating compressors, Solid-state circuitry, Boost starting torque, Disengages upon start, Operating temperature range -40°C to ±65°C, Intrinsically safe, fuse protected (fuse not user replaceable), UL recognized.Ideally suited for 2 thru 5 HP, 145-175 Mfd 330V capacitor.
810
ICM
810
More Details...

$44.91

   

This item usually ships: Same Day.
RAPIDSTART - CURRENT SENSING: Operates from 95-288 VAC, Maximum input voltage: 502VAC, Patented current sensing circuitry, Self-adjusting to voltage fluctuation, Easy to install, 2 wires, clip, or screw mounted, For scroll or reciprocating compressors, Solid-state circuitry, Boost starting torque, Disengages upon start, Operating temperature range -40°C to ±65°C, Intrinsically safe, fuse protected (fuse not user replaceable), UL recognized Ideally suited for 3 1/2 thru 10 HP, 243-292 Mfd 330V capacitor.
850
ICM
850
More Details...

$20.36

   

This item usually ships: Same Day.
RAPIDSTART - VOLTAGE SENSING: Increases starting torque up to 500%, Ensures precise starts, Not affected by ambient temperature, Recycles instantly (less than one second), For scroll or reciprocating compressors, for 115 or 230 VAC motors, Intrinsically safe, fuse protected, UL recognized. Voltage: 90-277 VAC, Maximum input voltage: 390 VAC, Recommended range: up to 1 1/2 HP, Operational temperature range: -40°C to ±65°C, 43-52 Mfd 330V capacitor, Fused (not user replaceable).
860
ICM
860
More Details...

$22.81

   

This item usually ships: Same Day.
RAPIDSTART - VOLTAGE SENSING: Increases starting torque up to 500%, Ensures precise starts, Not affected by ambient temperature, Recycles instantly (less than one second), For scroll or reciprocating compressors, For 115 or 230 VAC motors, Intrinsically safe, fuse protected, UL recognized. Voltage: 90-277 VAC, Maximum input voltage: 390 VAC, Recommended range: up to 2-5 HP, Operational temperature range: -40°C to ±65°C, 88-106 Mfd 330V capacitor, Fused (not user replaceable).
MAR115A1X3
ICM
MAR115A1X3
More Details...

$71.85

   

This item usually ships: 3-4 Weeks.
ICM Controls Delay on Make timer
MAR115A1X30
ICM
MAR115A1X30
More Details...

$71.85

   

This item usually ships: Same Day.
Delay on Make timer. High Power DOM. High power delay on make timer, Ideal to help prevent rapid short cycling of compressors in HVACR equipment, Heavy duty 10 amp DPDT or TPDT contacts, Exposed terminal base for easy, direct wiring to the relay. INPUT: Nominal Voltage: 115 VAC, Frequency: 50/60 Hz. OUTPUT: Type: relay, Form: DPDT, TPDT, 10 amps resistive @ 120 VAC. TIME DELAYS: 30 seconds.
   

Page:  1 2 3 4 5 6 7 8 9 10 11 12 13

Search

Enter a Part Name, Description, or Keyword.

Tip 1: For partial keyword, please use wildcard *.
For example b2ta*
Tip 2: If you want to find a particular manufacturer, use the "Browse by Manufacturer" feature.

Call Us: (866) 321-4822