Heat pump defrost timer. Ultra low cost, Direct replacement for Carrier CES0130024-00, Time and temperature control, Outdoor fan and reversing valve relay integrated into design, High installed base. INPUT: Voltage: 18 to 30 VAC, Frequency: 50/60 Hz, Power Consumption: 1 watt max. OUTPUT: O, W2 Type: Relay, Form: DPST, N.O., Rating: 1 amp @ 30 VAC. T1,T2 Type: Relay, Form: SPST, N.O., Rating: 1 amp @ 30 VAC. OF1, OF2 Type: Relay, Form: SPST, N.C., Rating: 1/2 HP @ 240 VAC. TIME DELAYS: Defrost Time: Fixed 10 minutes ±5%. Interval Time between defrosts: Pin-selectable 30/50/90 minutes. Power on Reset Time: 500ms. Test time: short across test terminals reduces test time 256x.
Head Pressure Control (120-480 VAC). Integral heat pump bypass circuitry allows electonic bypass of speed control. Eliminates overshoots common to on/off and pressure switch controls. Helps prevent evaporator freeze-ups, low pressure cut-outs and liquid-slugged compressors in low ambient conditions. Features: hard start, low temperature bypass, isolated 24 VAC supply. INPUT: Control 18-30 VAC, 50/60 Hz 1.8 VA maximum, Line input 120-480 VAC. OUTPUT: Maximum 10 amps, minimum 100 mA.
Head Pressure Control (120-600 VAC). Features: hard start, low temperature bypass, isolated 24 VAC supply. Eliminates overshoots common to on/off and pressure switch controls. Controls one refrigerant circuit. ICM325K1: with ICM375 probe, 50°-80°. INPUT: Control 18-30 VAC, Line input 120-600 VAC, Frequency 50/60 Hz. OUTPUT: Maximum 10 amps, Minimum 100 mA.
Head Pressure Control (120-600 VAC). Features: hard start, low temperature bypass, isolated 24 VAC supply. Eliminates overshoots common to on/off and pressure switch controls. Controls one refrigerant circuit. ICM325K2: with ICM376 probe, 70°-100°. INPUT: Control 18-30 VAC, Line input 120-600 VAC, Frequency 50/60 Hz. OUTPUT: Maximum 10 amps, Minimum 100 mA.
Head Pressure Control (120-600 VAC). Features: hard start, low temperature bypass, isolated 24 VAC supply. Eliminates overshoots common to on/off and pressure switch controls. Controls one refrigerant circuit. ICM325K3: with ICM376 probe, 95°-120°. INPUT: Control 18-30 VAC, Line input 120-600 VAC, Frequency 50/60 Hz. OUTPUT: Maximum 10 amps, Minimum 100 mA.
Head Pressure Control (120,208/240 VAC). Built in transformer eliminates cost, reduces installation time and simplifies wiring. Helps prevent evaporator freeze-ups, low pressure cut-outs and liquid-slugged compressors in low ambient conditions. Features: hard start, low temperature cutoff, high temperature bypass. Ideal for line voltage air conditioning and refrigeration. INPUT: 120 or 208/240 VAC, Frequency: 50/60 Hz. OUTPUT: -Maximum: 10 amps -Minimum: 100 mA.
Head Pressure Control (480 VAC). Built in transformer eliminates cost, reduces installation time and simplifies wiring. Helps prevent evaporator freeze-ups, low pressure cut-outs and liquid-slugged compressors in low ambient conditions. Features: hard start, low temperature cutoff, high temperature bypass. Ideal for line voltage air conditioning and refrigeration. INPUT: Voltage: 480 VAC. FREQUENCY: 50/60 Hz. OUTPUT: -Maximum: 10 amps -Minimum: 100 mA.
Probe for use with ICM325H, ICM326H, ICM327H and ICM330 head pressure controls with optional heat pump bypass. Temperature range: 70-100° F (21-38° C).
THREE PHASE LINE VOLTAGE MONITOR. Monitors "front" and "back" sides of system. Universal voltage operation: 190-630 VAC. Knob-adjustable features and system set points. Protects against voltage unbalance, high/low voltage, phase loss, phase reversal, faulty power, incorrect sequencing and rapid short cycling. VOLTAGE: 190-630 VAC, FREQUENCY: 50/60 Hz, VOLTAGE UNBALANCE: Adjustable: 2-25%, CONTROL: 18-240 VAC, DELAY ON BREAK TIMER: .1-5 minutes, OUTPUT: Relay, SPDT, N.O.: 10 amps, N.C.: 6 amps.
PHASE LOSS & REVERSAL PROTECTION. Low cost 3-phase protection for single side. Monitors for phase reversal, phase loss, unbalance % as a function of input voltage. Bright LED indicators for ON and FAULT. Universal 3-phase input: 190-600 VAC. Control voltage input 115, 208/240 VAC. Epoxy encapsulated for moisture protection. VOLTAGE: 190-600 VAC, FREQUENCY: 50/60 Hz, CONTROL: 115 or 208/240 VAC, OUTPUT: Relay, SPDT, N.O. 30 amps.
Tip 1: For partial keyword, please use wildcard *. For example b2ta* Tip 2: If you want to find a particular manufacturer, use the "Browse by Manufacturer" feature.
Patriot-Supply.com has spent thousands of dollars and invested countless hours preparing cross references and other information to aid our customers. All information on this website is coded and copyrighted. Any and all information taken illegally will result in litigation.
